All Products
Model number: HCS
Handcards Small
Handcards Small have the same comfortable, ergonomic handle as the classic handcards. Available with either a medium cloth for most fibres (72 point) or fine cloth for fine fibres (108 point). -portable -blend and card -stainless steel wire and rubber backing -comfortable round hand..
$CAD82.00
Model number: SC
Spinning Chair
This comfortable four-legged chair has a tall, straight back for good posture and freedom of movement. Made from turned Silver Beech hardwood to complement your spinning wheel. Features hand hold.
specifications
Seat height 43cm (17ins)
Overall height 96cm (38ins)
Weight 4.8kg (10&..
$CAD338.00
Model number: SCL
Spinning Chair
This comfortable four-legged chair has a tall, straight back for good posture and freedom of movement. Made from turned Silver Beech hardwood to complement your spinning wheel. Features hand hold.
specifications
Seat height 43cm (17ins)
Overall height 96cm (38ins)
Weight 4.8kg (10&..
$CAD461.00
Model number: BTO
Spinning Wheel Oil
For quiet effortless spinning
Transparent 15ml - ½ oz squeeze bottle.
Convenient 32mm - 1¼ins blunt needle applicator for hard to reach bobbin, flyer and wheel bearings.
The bottle contains non-staining, high grade, aromatic-free, white mineral lubricatin..
$CAD18.50
Model number: BTO6
Spinning Wheel Oil
For quiet effortless spinning
Transparent 15ml - ½ oz squeeze bottle.
Convenient 32mm - 1¼ins blunt needle applicator for hard to reach bobbin, flyer and wheel bearings.
The bottle contains non-staining, high grade, aromatic-free, white mineral lubricatin..
$CAD86.50
Model number: SB10
Standard Bobbin 10 Pack
Ten pack of single drive bobbins. Natural finish
Standard bobbin for:
- Traditional single drive spinning wheel
- Traveller single drive spinning wheel
- Joy spinning wheel
- Kiwi spinning wheel
Also works on wheels equipped with Sliding Hook Flyers, such a..
$CAD166.50
Model number: SB
Standard Bobbin
Single drive bobbin, available in natural or lacquered finish
Standard bobbin for:
- Traditional single drive spinning wheel
- Traveller single drive spinning wheel
- Joy spinning wheel (older model)
- Kiwi spinning wheel (older model)
Also works on wheels equipped with Sliding Ho..
$CAD20.50
Model number: SBL
Standard Bobbin
Single drive bobbin, available in natural or lacquered finish
Standard bobbin for:
- Traditional single drive spinning wheel
- Traveller single drive spinning wheel
- Joy spinning wheel (older model)
- Kiwi spinning wheel (older model)
Also works on wheels equipped with Sliding Ho..
$CAD25.75
Model number: FLYR
Standard Flyer
For Traditional and Traveller single drive spinning wheels.
Includes flyer, 1 standard bobbin, and hooks.
Natural finish.
Lacquer finish available by special order.
Ratios 6.5:1, 8.5:1, 11.5:1 & 17.5:1..
$CAD117.00
Model number: SHTL
Stick Shuttles
For all your weaving projects.
Available in five sizes:
STHL1 - 15cm/6"
SHTL2 - 26cm/10"
SHTL3 - 36cm/14"
SHTL4 - 46cm/18"
SHTL5 - 56cm/22"
SHTL8 - 76cm/30"
SHTL12P - 120CM/48" (sold in pairs)
Width: 3.5cm/1⅜"
Made from Silver Beech ha..
$CAD7.00
Model number: FNPS
Student Needle Felting Punch
- speed up your needle felting using multiple needles
- safely store needles in the hollow handle
- includes 3 needles - gauge 36 - medium
- high quality carbon steel needles
- affordable
Needle felting is easy and quick with endless possibilities to crea..
$CAD27.75
Model number: ADCSF
Super Fine Drum Carder - 120pt
Fibre preparation made easy
- 2 ratios for control
- packer brush and cleaning brush as standard
- adjustable drums for all fibres
- lacquered and assembled
- clamps and awl included
- quick and easy to remove handle
- cards up to 50gm fibre
This new, improved model ..
$CAD1,008.00
Model number: SRS
Super Reducer Set
Spin a finer yarn on your Country Spinner 2 or Kiwi Super Flyer without the yarn dancing around the orifice.
Two piece nylon bush set will reduce the orifice to 15mm (5/8") or 10mm (3/8")...
$CAD40.00
Model number: TLBCP
Table Loom Bungee Cord
Spare Bungy Cord for the automatic beater on Ashford Table Looms. Sold as a pair...
$CAD6.00
Model number: TLS
Table Loom Stand
LacqueredStand for Ashford Table Loom
Strong frame made from solid Silver Beech hardwood with 2 handy shelves and lacquered to match your loom. The loom fits onto the stand with no screws required. Stand folds flat for easy transport and storage.
Height from floor to base of tabl..
$CAD546.00